Contacting Wolfgang Engineering

Results 1 to 7 of 7

Thread: Contacting Wolfgang Engineering

  1. #1
    Registered
    Join Date
    Nov 2008
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Contacting Wolfgang Engineering

    Just trying to get in contact with Wolfgang. Anyone heard or done business with him lately?

    Thanks,
    Darren

    Similar Threads:


  2. #2
    Gold Member lovebugjunkie's Avatar
    Join Date
    Apr 2005
    Location
    USA
    Posts
    438
    Downloads
    0
    Uploads
    0

    Default

    No business with him lately, I tried contacting him once about a bad spindle I bought from him, never received an answer.



  3. #3
    Registered Drools's Avatar
    Join Date
    Feb 2009
    Location
    Canada
    Posts
    1290
    Downloads
    0
    Uploads
    0

    Default

    Hi Darren, I PMed you the e-mail address I have for him.



  4. #4
    Registered
    Join Date
    Nov 2008
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Thanks Drools, but I've already tried multiple times with that address. Got it from his home page.



  5. #5
    Registered Drools's Avatar
    Join Date
    Feb 2009
    Location
    Canada
    Posts
    1290
    Downloads
    0
    Uploads
    0

    Default

    well I'm out of ideas then. A problem with his product?



  6. #6
    Registered
    Join Date
    Nov 2008
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Well.... after only using the spindle for like 5-6 hours, it's sounding pretty noisy. I've read other posts on here about similar problems, and thought I'd get some feedback from the source. Unfortunately, I haven't gotten any response for almost 2 weeks. I'm still giving him the benefit of the doubt that maybe he's busy, but....



  7. #7
    Registered Drools's Avatar
    Join Date
    Feb 2009
    Location
    Canada
    Posts
    1290
    Downloads
    0
    Uploads
    0

    Default

    Have you tried to spin the spindle without the o-rings installed, bacically the spindle disconnected from the motor. The motor he uses has brushes and can feel quite rough when you spin it by hand but the spindle should spin freely or close to freely.
    If this makes sense.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Contacting Wolfgang Engineering

Contacting Wolfgang Engineering