- Help me interpret a routing parameter?
-
Registered
Help me interpret a routing parameter?
Hello.
I need to mill a PCB, got the bits and have a parameters table for speeds/feeds:
Routing Parameters for SC/SD208 Routers - FrezyCNC.eu
However, I am having trouble interpreting the last parameter (Z-Axis-Offset).
I am cutting the exact board described (1.50mm double sided copper clad FR-4) but I am unsure if the Z-axis-offset means I should only cut in -0.508 (the 1mm tool) and do 3-4 passes, or if I can cut through the whole board in one pass at the specified settings (and if so, what does this parameter mean?).
I am only asking because I need to do this in a few hours from now, and I would prefer not having to break a bit to find out.
Hope someone can help!
Best regards,
-D
Similar Threads:
-
- Help me interpret a routing parameter?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules