Drawing a chassis

[jalessi]

Motas,

Your creative input is necessary, otherwise I have no clue what you want.

If you are serious about doing this please provide a sketch.

Have a most awesome evening,

Jeff...

[motas]

Thankyou so much. It is very very close and I'm just quickly changing it to what I want. Basically remove the right flames and the left flames need to be like the other ones and cut out of it. Simple to change though. Will post a pic once I finished.
Thanks heaps.

[motas]

Sorry for extremely dodgy paint job but its all I have.
Thanks again your an awesome person.

[jalessi]

Motas,

Hope this works for your project.

Attached is a DXF for you to experiment with.

Jeff...

[motas]

Just went to check if I'd missed anything. Theres one other hole to the left of that one where the engine mount goes through. Very annoying since thats the main point of the design. I cant look at your dxf at the moment because im on my laptop but will have a look tommorow.
Thanks heaps.
Edit. Lol you have a pic too. The looks freakin sweet.

[motas]

Well im on a computer now. I had a much easier idea. I have asked my cousin to draw a flaming skull which will either be cut out of the front of the chassis infront of the holes or engarved all the way along the side of it. I am very grateful for all your help and its a pity neither of our ideas would work but thanks heaps anyway. Now I have one more question which is what to use for a simple program to convert images to cad. Does autocad 2011 have it included or do I need to download something?
Thanks heaps for all your help you've been great.

[motas]

Hey again. Thought I would show you what I ended up with. I got a beginer logo designer to draw it up then vectored it into cad. Big thanks to Jeff for help in both threads.