Originally Posted by
samu
I found that the parameter listed are not good for 0i. which model of 0i (0i model C or D)? it seems that 4028 and 4029 are ok for all 0i, i try some test on my old 0M-D with no luck, prm 6528 and 6529 have no effect. Maybe a more promising way is to use the overload detection. It is set with prm #4090 :% of the load meter full scale at which the overload condition is on and prm 4123: time that the overload condition must last befor spindle alarm AL-29 stop evrything. These parameter are for the 0i series, il try with 6590 and 6623 on my 0M-D. Please keep me informed of your try and result