- Fanuc Control, Accessing Diameter For Use in Macro After Auto Hole Centering
-
Registered
Fanuc Control, Accessing Diameter For Use in Macro After Auto Hole Centering
Hey,
On our Fanuc WEDMs a diameter is displayed in the lower right hand corner after a hole pick up. I'd like to move this diameter into a Macro and evaluate it. Any ideas how to move this diameter into a Macro?
Thanks for any help you can offer.
Similar Threads:
-
-
Registered
Re: Fanuc Control, Accessing Diameter For Use in Macro After Auto Hole Centering
kinda old thread but can you take a picture of the number you're talking about? I'm not familiar with Fanuc edm machines but I don't see why this wouldn't be pretty easy
-
Member
Re: Fanuc Control, Accessing Diameter For Use in Macro After Auto Hole Centering
I am not familiar with this machine, but there might be a system variable which stores diameter. Look into your manual.
- Fanuc Control, Accessing Diameter For Use in Macro After Auto Hole Centering
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules