Can you attach the gcode to this post.
So One a side note I had a problem today with my small cnc machine and I am not sure why it happened can anyone let me know as to why this happened?
hello everyone I had something bad happen today I waited 3 days for this piece of material and look at what happened
Can anyone tell me what happened?
I designed in Fusion 360
sent to Universal Gcode Sender Version 1.0.9/ Nov 11 2015
and cut on X-carve
any help would be appreciated thanks
Similar Threads:
Can you attach the gcode to this post.
yes I can here are the 3
well actuall it wont let me upload a .nc file any suggestions?
Here the gcode files from google drive
https://drive.google.com/open?id=0B_...1puV3Q2dXVZUkE
https://drive.google.com/open?id=0B_...Fk3WTBvQXB5ak0
https://drive.google.com/open?id=0B_...1l5b3BRQzVfNlU
Firstly though not the issue here but you should really get into the practice of outputting all operations into a single file. If you have toolchanges use m6 macro, for manual toolchange some control software you select it to pause and wait for cycle start when m6 in called upon in code. Or you may need to modify the m6 macro to work to this effect.
Just rename the nc file as .txt I believe.
I'll see if I can open your code when I'm back in the office
okay thanks
and yeah I know I am pretty new to cnc but with my large cnc that I just bought I need to learn gcode a bit better I will be running mach3 on that machine but I need to learn alot for now it just seemed like the easy way to get around manual tool changes by breaking up the files by tool
Apparently Universal G-Code Sender didn't like the g-code format.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
werid I have never had a problem like this before with universal gcode sender
finally got it to work today lol