| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| OpenSource Software For the Discussion of Opensource CAD/CAM and NC shareware software etc) |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-24-2006, 03:20 PM
| |||
| |||
Hi, I'm new to cad. I'm having a problem when I transfer a dxf drawing to cad. The dimensions are way off and I can't change them in the cad program. I'm using Cam expert cad cam software. Any help would be greatly appreciated. Thanks Kevin    |
|
#2
11-24-2006, 04:30 PM
| ||||
| ||||
| You don't want to change the dimensions, you probably want to scale the drawing. It most likely got converted from inches to mm, or mm to inches. Scaling by 25.4 or 1/25.4 might be what you need to do.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
