Source for Allegro 5804B IC's - Qty 10???

[FrankG]

I would like to source 10 of the old Allegro 5804B Stepper driver IC's, but appears that they have become scarce... Have tried Digikey, mouser and Newark...

Any info greatly appreciated... I have a 3-Axis pcb freshly etched and 2 single axis PCBs to populate (really I just need 5, but figure I'd get 10 if I could find them...

Thanks in advance...

[pminmo]

http://www.mpja.com/directview.asp?product=14518+IC
http://www.futurlec.com/Others/UCN5804Bpr.shtml

I've done business with both supplers with good results.

Phil

[FrankG]

Phil,

My mouse hovered over a direct Email to you, but I thought that since you've done so much for the cause of "Open Source - CNC" I'd not pester you with such a mundane request...

Thanks a bunch!!!

[HobbyCNC]

Originally Posted by FrankG I would like to source 10 of the old Allegro 5804B Stepper driver IC's, but appears that they have become scarce... Have tried Digikey, mouser and Newark... Any info greatly appreciated... I have a 3-Axis pcb freshly etched and 2 single axis PCBs to populate (really I just need 5, but figure I'd get 10 if I could find them... Thanks in advance...

www.hobbycnc.com

Dave Rigotti

[FrankG]

Dave,

Thanks for the reply...

I had tried one other Controller company about getting just the drivers but didn't get a response... As I realize that the drivers are a part of thier bread & butter I wasn't surprised, and understand completely...

I'll contact you off-forum via the HobbyCNC site - Contact Info and arrange PayPal Etc...


Thanks again!!!