LinkBack URL
About LinkBacksThat,if someone get me support!
Send me an email address via PM.
Is this for the legacy 1300 stand-alone series?
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
HI!Yes is about the 1300 legacy series! Only y know is a appropiate whit DMC 1340(4-axis controller),but even for 1340 y d'ont find information!Is a customer product,and Galil d'ont sharre any information!My e-mail adress is simira@clicknet.ro Thank you! Radu
The manuals are down loadable from the Galil site, But I will send them if you are having a problem.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Hi!
Thank you for quick response ! I tryied,even on Galil-forum,but the official response was:1341 is a customer-product and d'ont give any data on this product. My only chances(choyses)is to find a "non-official" way,a person...,a Man... Is more complicated because i need to find also the software for programing this controller,and my fear is :the software is also customized?In that case...
It is doubtful that it is that much different from the basic 1300 series, at least that has been my experience, there is sometimes a small hardware option that has been added.
I also doubt there is anything different for programming than the standard DMCTERM program that you can download to access the controller.
What are you trying to do? Change the program or service the unit?
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Hi! You are so correct! But,now i need to identiffy over 230 pins!All connectors is different! A lot of work to do! I want to "home made" a cnc engraver machine,nothing special,but i find verry cheap this controller on e-bay,and i'm verry excited to see what she can. Thanks for your time! Is appreciated! Radu
If someone had the same problem,now y can help.I just identiffy the pins of the main connector(J-1 axes x,y,z,w)
"Intuition is the shortcut of intelligence!"
Posting Permissions
