LinkBack URL
About LinkBacks
Read post 1 and 28. Internal comparator – this comparer residing inwardly microcontroller and generating interruptions under each step from encoder.
| | |
Many tanks arisov77,
I use same scheme just like jozefp. But what means "on interruption from internal comparator"?
Tanks.
Read post 1 and 28. Internal comparator – this comparer residing inwardly microcontroller and generating interruptions under each step from encoder.
Last edited by arisov77; 03-06-2009 at 05:51 AM.
arisov77,
For my project i intend to use this encoder.
500 ppr
3 outputs channels.
Hi arisov77,
I try to link servo with servo tuning and don't work.
A window error message appears but don't understand what write.
Tanks.
Show ScreenSet with error message. Connect - USB or RS-232? And on what scheme is collected converter?
+ http://translate.google.com/translate_t#
Last edited by arisov77; 03-18-2009 at 12:01 PM.
Появляется сообщение можете не читать, потому что некоторые символы отсутствуют, возможно, потому, что я еще не загружена поддержка для русского языка.
Я использовал RS-232, и работа с Windows XP.
Dobrý jozefp,
Vidím, že na fóre, hovoríme chvíľu?
Vďaka
You Write, in english - we not one here. To whom that this can be useful. In Private Messages possible and in russian.
Installation of support of the russian language - will not help. You have no relationship with servocontroller. Answer my questions in message #41.
sorry for message #42 and 43,
I try to connect servo with RS-232 interface, according to last version of scheme and hex files according to thread #1 and #15.
Last edited by moraru; 03-19-2009 at 05:41 AM.
Connect RS232/UART to sevocontroller. Connect as on figure external led and resistor. Give power. When striking the button "Подключить" (Connect) led must once On/Off (flash). If You have no flashings, that check the number COM port. And correctness of the montage RS232/UART. If led blinks (1 once), that check the chain from output RS232/UART before conclusion 2 and 3 AtMega88 (DIP).
You are a Fuse-bits have programmed? If yes, that try here is so.
I will do this scheme and I try.
I have AVR Studio 4.15 and AVRISP MK2 USB programmer and this is images of fuse settings. I observe that fuse settings is sett from hex files.
I have no programmer AVRISP II so picture to show can not. But beside You exactly are wrong installed Fuse-bits. This 100%!
Try so.
Posting Permissions
| | |
