Need Help!- Elm-Chan smc servo controller programming and tuning

[waleed alhadidi]

Hi all,
I am building this dc servo controller :
http://elm-chan.org/works/smc/report_e.html

I am a manufacturing engineer and have no background on microcontrollers. I need to know how to input the parameters to the controller from the PC ? What program is used.
Till Now I have not programmed the at90s2313 MCU although i have the programmer but because in the firmware of th smc there are three files:
avr.inc
smc.asm
smc2.asm
and i don't know which one is the source code that i need to program th MCU and how will I enter the parameters. So I need help in this.
Thank you in advance.

[waleed alhadidi]

Can't anybody help me please

[CountZero]

I answered in you other thread: http://www.cnczone.com/forums/showthread.php?p=440898

Crossposting is generally frowned upon and will not get you more answers.

[waleed alhadidi]

thank you CountZero, Sorry for crossposting, as you mentioned I wanted to get more answers because I am in hurry.