LinkBack URL
About LinkBacks
Looks like just backup of eagle board files. Which you can see the copper, with no schematic or parts info, pretty useless.
| | |
Hello all, my first post, anybody seen this before, will it work, I have the chips just need to make pcb, it came from Japan I think, translated by google,
here is the web address
http://translate.google.com/translat...7ADBF%26sa%3DG
& the files as an attachment I hope
Looks like just backup of eagle board files. Which you can see the copper, with no schematic or parts info, pretty useless.
Phil, Still too many interests, too many projects, and not enough time!!!!!!!!
Vist my websites - http://pminmo.com & http://millpcbs.com
Hello pminmo,
You really need to look again, I have schematics & parts info, .sch & .brd files for the 3 axis & a lot of backup files ending with .b#1 or .s#1, if you rename them ending .brd & .sch they will open in Egale, I havn't looked at them all, yet not enough hours in my day for work & play. I will try & post a bitmap from Egale of the 3 axis again here, it has a low resolution of 90 dpi to reduce file size for the upload, if you open the file SLA7062M-3Axis-V2.brd from the web link you will find the original.
Regards Tim
The verion I downloaded just had .brd files and it's backups...b#1, etc. No sch or s#1, etc...
Phil, Still too many interests, too many projects, and not enough time!!!!!!!!
Vist my websites - http://pminmo.com & http://millpcbs.com
I presume you will find all files needed at this zip file.
I have tried with 7-zip. winzip was not working ok.
Hello I found the files in the links below, I have never gone any further with it, its easyier to buy the kit from Hobby cnc in the USA, still very interesting to look at & probably worth the effort if you have the time & skills required to build it.
http://64.233.179.104/translate_c?hl...%3Den%26sa%3DN
http://translate.google.com/translat...%3Den%26sa%3DN
I have been looking for low cost solutions and also reliable. and decide to use an IC from Toshiba. TA8435.
it is easy to build a small board and working in bipolar mode I can find cables anywhere.
good luck with DIY projects.
Anyone built this yet?
hello ,
I can tell you one thing, sla7024 works well, I retrieved photocopieurs module that I was able to operate using the datashet means well PMW
Posting Permissions
| | |
