I'm new to the forum and really excited to get started on a cnc build of my own. I was thinking of starting off with a small inexpensive cnc to learn the parts and how they interact. The machine would mostly be used by my wife and daughter to cut out lettering and designs from paper stock, vinyl and thin wood for scrap booking and crafts (like the circut machine they advertise on TV). I would also like to use it to maybe do some pcb's and cut parts for my next (much larger) cnc. I was thinking something that would use a dremel as the router.
Can anyone point me to a good set of plans for such a machine? I would also like to build the electronics so I can learn the in and outs of those also. Any help or advice is appreciated!!