There are some rack and pinion designs scattered about in the build logs. The most I have seen in one place is in the plasma builds. Plenty of them there.
Dear All,
I am studying the method of design with rack and pinion concept. Who can advise me for link on CNCZONE to study it? I am building 4'x8' ft table.
Thank you
Ton
There are some rack and pinion designs scattered about in the build logs. The most I have seen in one place is in the plasma builds. Plenty of them there.
Lee
http://www.mechmate.com
And also shopbot
If you google "MechMate" they have some free plans - and some reference to other rack and pinion set ups here on CNCZone too.
and-- check out Inshore Boats -- Tom is/was a member here
http://www.inshorepowerboats.com/cnc.../CNCROUTER.htm
Those will get you pretty close.
BTW -- where are you in Thailand?
Jim
Experience is the BEST Teacher. Is that why it usually arrives in a shower of sparks, flash of light, loud bang, a cloud of smoke, AND -- a BILL to pay? You usually get it -- just after you need it.
Everybody!!
Thank you very much for the information.
Mongkol
Jim,
Thanks for your help.
I forgot my reply.I live in Nonthaburi province. It is closed with Bangkok in Thailand. I am very glad to be your friend. and you? Where are you right now?
Nice to meet you!
Ton
Ton -
Nice to meet you - I am on my way back to Langkawai, Malaysai - then on to Phuket. Have some friends in Bangkok.j - and may do some land traveling in Thailand this season - not just on the water. I will keep in touch -- I'd like to see you rack and pinion set up if I get in the area.
Cheers - Jim
Experience is the BEST Teacher. Is that why it usually arrives in a shower of sparks, flash of light, loud bang, a cloud of smoke, AND -- a BILL to pay? You usually get it -- just after you need it.