4' X 4' TABLE PLANS

[05fmtc]

Oops, sorry for the caps, at work!... Anyways Im like a 3-day Newbie, and looking to find plans for a 4' x 4' router table... I am planning on building something out of composites due to the weight advantages of the gantry...

If someone could point me in the right direction for some good plans, that'd be greatly appreciated...

[tajord]

http://www.cnczone.com/forums/showthread.php?t=38220

check here, he offers plans for a 4 X 4 machine, go through his thread, you can email him on the price, seems to be a very popular machine.

[05fmtc]

Thanks, he already contacted me... I think Im going to go ahead and get his plans and see what I can do...

Thanks again!

[05fmtc]

Speaking of Joe, clean out your box!.... Tried PMing you, no luck...

[domino11]

Why not also look at www.mechmate.com

[tajord]

Just a note domino, you have a little typo: (Location: cananda)

[tajord]

The mechmate would indeed be a good choice if you can fork up the change, a very robust machine i might add, great speed and power, you probably won't need an upgrade if you go this route.