| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Open Source CNC Machine Designs Discuss Open Source CNC Machine Designs here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-09-2007, 09:04 PM
| |||
| |||
i am working on a small home made cnc router.my design work is done mostly by looking at other peoples designs.i have the x and y axis working fine.have not got motors on yet.but they turn freely.no added friction so i think they should funtion good.i have a problem with the z axis it is made with a 1/2 inch lead screw that rotates alright,but i am only getting about 2.5 " travel before it binds up the z-axis assembly is about 5" height.what can i do to gain more travel?  |
|
#2
12-10-2007, 08:04 AM
| ||||
| ||||
| You would need to post pictures, and possibly your design so we can see whats going on. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Z axis problem | zephyr9900 | Tormach PCNC | 7 | 12-20-2009 07:43 PM |
| Z Axis problem | studysession | Mach Software (ArtSoft software) | 2 | 05-05-2007 06:06 PM |
| Problem with Z axis | MagTDK | DIY-CNC Router Table Machines | 56 | 10-31-2006 08:12 PM |
| z axis problem | UMASSREHAB | TurboCNC | 1 | 09-29-2006 05:45 PM |
| Z-axis problem | Trainhound | Machine Problems, Solutions , Wireless DNC, serial port | 3 | 12-14-2005 02:24 PM |
| | |
Linear Mode
