Designing phase...Input please.

[emtffkev]

I am in the process of designing my machine from the ground up. I am going to be looking at pictures, reading other peoples ideas, and using some of my own, and putting together a combination of what I think will suit me best. I have to say, I love the Rockcliff design and will be purchasing that on thursday when I get payed. I am loosely basing my design off of that as far as looks go and style. I am looking for a somewhat small machine to get my feet wet, and in the future will make a larger one when space allows.

I've attached what I have gotten so far and am open to any praising or criticism that you may have...

[Konstantin]

Look like a standard proven design. Will work imho.

Konstantin.

[emtffkev]

I know right now it looks kind of generic, but my plan is to take and get a base setup planned out and then go through and pick and prod all the parts I think can be fixed/upgraded/altered/completely reworked.

[Coogrrr]

JGRO is VERY nice design and is very close to what your doing.

http://www.cnczone.com/forums/jgro_router_table_design/

AND!!!

Jooe's is also right there..

http://www.cnczone.com/forums/joes_cnc_model_2006/

Not that I wouldnt buy the Rockcliff design I am actually going to use printer parts and drawer slides for my son to build that one. But the other to plans above are free and worth the consideration.

OH and yes your design pic is a good one and your on the right path!

just my .002 cents worth

Coog