CAD drawings/dimensions for P/C routers?

[Lee DeRaud]

Does anyone have CAD drawings for the Porter/Cable 69x/89x router motors? Lacking that, can someone tell me the length of the 3.5" "barrel" portion of each?

I'm in the design phase, already have the K2CNC mount but not the router: need to know how much of it sticks down under the mount.

As long as I'm here, does anyone have an accurate number for the weight of each, motor only? The P/C site only shows them with various bases.

[ger21]

I have an AutoCAD 3D model of an 892 here.
I don't know the exact weight, but they are probably about 7-8 lbs.

The "barrel" of a 690 is 3-3/8" long, and the bottom of the collet is 1-3/8" below that.

[Lee DeRaud]

I have an AutoCAD 3D model of an 892 here.
I don't know the exact weight, but they are probably about 7-8 lbs.

The "barrel" of a 690 is 3-3/8" long, and the bottom of the collet is 1-3/8" below that.

Thanks, just what I needed!