I am posting my first CNC design. It will have elevated x axis to prevent chips from fouling the motion. It is cantilevered in the front to allow more access.
I have designed some feed tabels to help when using a 8' sheet of plywood.I am hoping the plywood can be indexed every 2'. Notice that the y axis is longer than the x axis. I have tucked the p/c router under the drive to reduce the moment. please comment.
Last edited by johngalt47; 07-13-2010 at 07:03 AM. Reason: attachment did not work
Posting Permissions
LinkBack URL
About LinkBacks
