3d tool paths

[ginamc]

hi,

I bought a CNC router a few months ago. I have been using bobcad 19 for routing 2d parts. I draw every thing in AutoCAD and dxfout into bobcad. I mostly use bobcad to generate tool paths and g-code.

I have not created 3d parts yet, but I am very proficient in AutoCAD 3d. My thoughts are that I would create the model in AutoCAD and dxfout or IGES out into bobcad. Then generate tool paths, similar to what I do in 2d. I have heard many good things about CNCone and creating 3d models.

So my question is this. For those who have use both CNCone and Bobcad. If I am creating the model in AutoCAD, would there be any benefit to switch from Bobcad to CNCone. I would be using only tool path generation functions, and the NC side of the program. I don't think I would be interested in comparing the model creation features between the two programs.

Does any one know how much One CNC cost? I tried to find out on the web page, but you have to contact them to get a quote. The problem with contacting vendors to get a price quote, is that they will do follow up calls, and pester you until you buy.

Thanks in advance for any help

Gina

[cbass]

Hi,

I too am considering Onecnc. I think that One is going to be much more intuitive to use than Bobcad. As far as cost, I think the Onecnc express is $1000-1500. Good luck.

[Ken_Shea]

The problem with contacting vendors to get a price quote, is that they will do follow up calls, and pester you until you buy.

Gina,
I cannot imagine OneCNC not respecting your request of no followup contact, sure they want to sell but they are also a professional company. If repeated followup is a concern then just ask for a quote and you will contact them later with any additional questions or a on-line demo. They cannot follow up unless you give them your telephone or email address.

Edit:
To purchase OneCNC and not use the Cad is not a good expenditure of money, it would be like buying a car just to listen to the radio and never drive it. The integrated support for both CAD and CAM is just too useful not to exploit.

[Matt Berube]

If you have high speed internet, get the online demo. You will love the software.

Top of the line XR mill expert is around $6500.

[ginamc]

Thanks to all who responded. It is true paying 6,500 and not using the cad side of the software would be like buying a car and just using the radio. I think I will stay with Bob Cad. It is affordable, and I have been able to create my parts wih Bob Cad and auto Cad with no major problems.

Thanks for the advice.

Gina

[wms]

Gina,

OneCNC has packages that start in the $1000 to $1500 range....

Call them and get some info...they are not like some other cad/cam companies that send you a fax or phone call every three days after you contact them..