Can anyone please help me on how to split a surface into two separate sufaces in ONECNC XR2 Professional, ie. where the surface crosses the plane or where two surfaces intercept each other and there are waste areas that need to trimmed away.
Any help would be appreciated as I am new to 3d surfaces.
Use "Split with Plane" if it is a solid and it will split it there..where the surface crosses the plane
If it is a surface> create a rectangular surface to merge with your surface.
"Merge" them together, then "split into surfaces" and discard what you don't want.
"Merge" them together, then use "split into surfaces" and discard what you don't need.where two surfaces intercept each other
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)