4Th Axis add on

[fc911c]

Can 4th axis be added to all the versions of mill?

thanks
Frank

[Konstantin]

Sure, why not.
A is on X, B is on Y and C is on Z iirc.
All depends on if you can fit it on you machine and if your PSU will have enough Amps to host another drive and if your BOB has free outputs.

Konstantin.

[fc911c]

Hi

I guess I didn't ask my question right. Will Express and Advantage versions of OneCnc XR2 do 4 axis or is it only Pro and Expert.

Thanks
Frank

Sure, why not.
A is on X, B is on Y and C is on Z iirc.
All depends on if you can fit it on you machine and if your PSU will have enough Amps to host another drive and if your BOB has free outputs.

Konstantin.

[wms]

Will Express and Advantage versions of OneCnc XR2 do 4 axis or is it only Pro and Expert.

Only Pro or Expert.

[fc911c]

Only Pro or Expert.

oh well, too bad I really like the software, the Pro might be a bit too much dow for me. I definitly will need the 4th axis down the road.


Thanks
Frank