post processor


Results 1 to 2 of 2

Thread: post processor

  1. #1
    Registered
    Join Date
    Dec 2005
    Location
    usa
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default post processor

    Does any one know if I can use the same post processor in ver. 7 as I am using in ver. 5
    Thanks

    Similar Threads:
    RMILES


  2. #2
    Member
    Join Date
    Aug 2010
    Location
    Ireland
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: post processor

    yes, post processors are compatible, just go to the onecnc folder - settings and copy all your post processors into the same folder in xr7. Hope this helps



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

post processor

post processor