Need Help! Need help with onocnc undercut machining


Results 1 to 2 of 2

Thread: Need help with onocnc undercut machining

  1. #1
    Registered
    Join Date
    Jul 2016
    Location
    United Kingdom
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Need help with onocnc undercut machining

    hi guys I'm having a bit of trouble and wondered if any of you could help me out, I'm using onecnc xr5 (need to upgrade really) I am trying to do a tapered slot with a rad bottom but as I'm using the lollipop cutter it seems to do dinting the bottom to a point the finishing doesn't seem to get out. I was wondering if anyone else has had this problem and can shine some light into what I might be doing wrong. I have tried to make the cutter higher but then it doesn't finishing the rad at the bottom and iv also tried all of the programmes like z level rough and planer finish and the bottom is a taper also. I have attached some pictures to show you what I mean and any help would be greatly appreciated.

    Ta in advanced Tom

    please don't worry about the sides at the top that's just because I made my block bigger the actual job.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Need help with onocnc undercut machining-thumbnail_20160730_082821-jpg   Need help with onocnc undercut machining-thumbnail_20160730_082840-jpg  


  2. #2
    Member blooboy's Avatar
    Join Date
    Jun 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Need help with onocnc undercut machining

    i would use end mill to z level rough then ball nose to planer finish.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help with onocnc undercut machining

Need help with onocnc undercut machining