Need Help! One Cnc XR4 Problem Lathe


Results 1 to 3 of 3

Thread: One Cnc XR4 Problem Lathe

  1. #1

    Default One Cnc XR4 Problem Lathe

    Hi all.
    My problem is the cycle time on Xr4.
    When i turn a length in Z-, then go onto job sheet, the cycle time is out.
    Example
    If i turn 20mm long at 1000rpm .1 feed rate, i should get 12 secs.
    One cnc job sheet gives me 23 seconds.
    Has anybody got any ideas?

    Thanks in advance.

    Ash

    Similar Threads:


  2. #2
    Member wms's Avatar
    Join Date
    Mar 2003
    Location
    wyoming
    Posts
    927
    Downloads
    0
    Uploads
    0

    Default Re: One Cnc XR4 Problem Lathe

    Ash,

    I get 12 seconds here with your example settings.

    That is with the default post.

    You sure you don't have a second finish pass set ??

    You could post your sample file to look at.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3

    Angry Re: One Cnc XR4 Problem Lathe

    Quote Originally Posted by wms View Post
    Ash,

    I get 12 seconds here with your example settings.

    That is with the default post.

    You sure you don't have a second finish pass set ??

    You could post your sample file to look at.
    .

    Hi
    I only have 1 pass.
    Also, if i drill with the same spindle speed and feed rate i get the same time on the job sheet as when i turn?
    I have been through all of the settings and cant find anything that would cause this.
    Thanks for your input )
    Regards
    Ash



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

One Cnc XR4 Problem Lathe

One Cnc XR4 Problem Lathe