Need some onecnc help

[turboboy]

I been downloading programs from my one cnc in to haas vf0. Now I get the alarm "H and T Not Mat". Is there a setting in one cnc thats not writing the program right. Any fixes?. thanks in advance

[wms]

OneCNC will pass along whatever value you type in the dialog boxes for the H ...so if you typed H2 and for T3, that is what it will output..it does always default to T and H matched, but if you over ride it, (by entering something different), it will output what you enter...

[turboboy]

Im just learning all this g code stuff. what dialog box is H that your refering to on onecnc?

thanks

[ChrisJ]

Here is where those variables are set.

Chris

[turboboy]

I doubled check those variables there all the same tool. It seems to be only tool #3 and # 8 the program isnt doing the g code t8 in the program for some reason . Very strange.

thanks for the help

[HuFlungDung]

Turbo,
If you can zip together both your own machine post file and the XFA file, I can load it and take a look at how you've got your post and processes set up.

While it sounds as though you've got "tool modal" checked in ncsetup, and are using the same tool for more than one process, the tool call might be eliminated for the second process, but there would be no reason for the H or D to switch to another value other than the correct one set in the first process using that tool.

Take care that the tool descriptions must be unique (different by one character) in the tool list, otherwise OneCNC will consider the two tools to be the same tool. Then "tool modal" comes into effect again, and a tool call for the second "identical tool" will not happen, even if the T value is different.