LinkBack URL
About LinkBacks
Danb did you get the demo yet.
| | |
Does eveyone know there is a OneCNC demo available? I called them last week and they sent me a link.
I am not sure why they haven't announced it here yet, but they didn't tell me not to say anything...so here is the link I used:
http://www.onecnc.net/today/download.htm
2Tall
Danb did you get the demo yet.
Dan,
I've been informed your activation code was delivered earlier this afternoon.
OneCNC_USA
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I got my activation code today as well. I havent had much time to try it out because I have to drop off some parts and pick up more material for a job. I hope I can try it out before my activation runs out. I have alot of 304L stainless to run, it will take at least a week to do it all.
Is there a time limit? How long are these activation codes good for? I thought it was just a demo...
Hi,
That will be great to have an Onecnc demo for evaluation. Myself I was always very curious to see how it works as I have read a lot of very good things about it but had no chance to see it. On other hand it seems to be a very good solution (complete and affordable) for a small workshop/business as I would like to setup. Unfortunately the link does not work so any chance to see what it can do.
Zoltan
Zoltan,
I've heard a few others report that they could not get the download link to work, yet others could. Perhaps it is a browser issue?
I tried it with IE and the download seems to work fine.
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hi,
Thank you for reply. I tried from two computers, two different IP services and each time the download button took me to another page of Onecnc site - the regular download page of Onecnc where is no evaluation package download. It was no sign to be something else than a link to the page I mentioned above.
Zoltan
Yes, I talked to Kanasha yesterday afternoon.I've been informed your activation code was delivered earlier this afternoon.
Thanks for letting me take a look.
Dan
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Zoltan,
The eval is only available to North and South American territories. Residents outside these areas will need to contact their local OneCNC office.
OneCNC Global Offices
OneCNC - USA
Last edited by OneCNC; 08-31-2006 at 11:11 AM.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hi,
Thank you for guideline. Few months ago I have tried to find out a local representative/seller of OneCnc but did not succeed. I have sent an e-mail to the address posted on site questioning about, but I got no answer and gave up to the idea. Now I was very excited about the possibility to see how it works but it seems I lack the luck.
Zoltan
yes it has a time limit of 15 days. :frown:
Posting Permissions
| | |
