One cnc post for C Tek / CNT controller


Results 1 to 12 of 12

Thread: One cnc post for C Tek / CNT controller

  1. #1
    Registered
    Join Date
    Dec 2007
    Location
    England
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default One cnc post for C Tek / CNT controller

    I am looking for a post for the above controller. C Tek also know as a CNT Controller The machine goes under the brand name guise of 'powercentre' in the UK, all be it an optimistic name I have no idea if this machine/ controller is marketed in the USA or other countries. I guess it must be as they have to be sold somewhere.

    I have already posted in the onecnc forum but that's a little used forum with not a lot of exposure it seems.

    I have attached an image of the control if case it rings any bells with someone seeing this controller used with onecnc

    Any information or even a post to try would be appreciated.


    Kind regards,

    One cnc post for C Tek / CNT controller-c-tek-cnt-jpg

    Similar Threads:
    Last edited by scott0031; 05-25-2014 at 07:25 PM.


  2. #2

    Default Re: One cnc post for C Tek / CNT controller

    Hi Scott
    Here is the post for your c-tek controller
    just unzip and put in your settings folder where OneCNC is installed on your pc
    C-TEK.zip



  3. #3
    Junior Member AZZAMGHOST's Avatar
    Join Date
    Mar 2016
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    THANK YOU f



  4. #4
    Registered
    Join Date
    Oct 2016
    Location
    Turkey
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: One cnc post for C Tek / CNT controller



    Last edited by hasanmmm; 02-18-2017 at 02:06 PM. Reason: fault


  5. #5
    Registered
    Join Date
    Nov 2010
    Location
    United Kingdom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: One cnc post for C Tek / CNT controller

    Hi ,
    Can anyone help out with the post processor for the same CTek machine as above but running bobcat V21 ??
    Thanks



  6. #6
    *Registered User* 43howie's Avatar
    Join Date
    Oct 2018
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: One cnc post for C Tek / CNT controller

    Quote Originally Posted by k99arl View Post
    Hi ,
    Can anyone help out with the post processor for the same CTek machine as above but running bobcat V21 ??
    Thanks
    hi i have same controller on rambo v5 can you offer any help or advice im in uk winsford cheshire were machine based thanks my no 07830179584



  7. #7
    Member
    Join Date
    Jul 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: One cnc post for C Tek / CNT controller

    Hey guys thanks for the file for One CNC and Ctek.

    Ours has the same control as pictured.

    I've tried to load a program from onecnc into the machine via floppy disk and having no luck at all.

    There's not much out these about these machines. Any help greatly appreciated

    Matt



  8. #8
    Member Oswal's Avatar
    Join Date
    Sep 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: One cnc post for C Tek / CNT controller

    BUENAS NOCHES, AL MOMENTO DE INTALALR EN MASTER CAM NO ME DEJA ACCEDER



  9. #9
    RichyRich's Avatar
    Join Date
    Jul 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Kinger8938 View Post
    Hey guys thanks for the file for One CNC and Ctek.

    Ours has the same control as pictured.

    I've tried to load a program from onecnc into the machine via floppy disk and having no luck at all.

    There's not much out these about these machines. Any help greatly appreciated

    Matt

    Hi Matt,
    My employments workshop has this type machine, and have been battling as well. Ours doesn’t have a floppy but I’ve seen the Rs-232 cable work to a usb and laptop. I’ve been programming manually in the meantime. I’ll keep you posted with progress… does anyone know what file type C-Tek/ CNT accepts?



  10. #10
    Member Hennierundle's Avatar
    Join Date
    Aug 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by RichyRich View Post
    Hi Matt,
    My employments workshop has this type machine, and have been battling as well. Ours doesn’t have a floppy but I’ve seen the Rs-232 cable work to a usb and laptop. I’ve been programming manually in the meantime. I’ll keep you posted with progress… does anyone know what file type C-Tek/ CNT accepts?
    Hi richyrich

    Im programming with solidworks solid cam and i need to save the file as .cnc for it to accept it

    I am also battling to get the right post processor to communicate properly with the machine as some of my programs dont want to work on machine but it does on the simulation



  11. #11
    Member masoudi's Avatar
    Join Date
    Feb 2023
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: One cnc post for C Tek / CNT controller

    Hello. Does anyone have information about controlling the milling machine with c-tek control.



  12. #12

    Default Re: One cnc post for C Tek / CNT controller

    Thanks you.
    duotrigordle



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

One cnc post for C Tek / CNT controller

One cnc post for C Tek / CNT controller