Face milling

[TURNER]

Hi can any of you onecnc users tell me if the software supports facemills with angled sides eg 6 or 8 sided tips. See link for eg
KMS - Shell Mills 66° Lead
Thanks,
Keith.

[Ken_Shea]

Keith
Not directly but you may be able to cheat a bit and list it under the Chamfer tools.

This is Library for facing cutters, of course any number can be added.

[TURNER]

Keith
Not directly but you may be able to cheat a bit and list it under the Chamfer tools.

This is Library for facing cutters, of course any number can be added.

Yes, thanks, or looking at your tool pics, a taper mill would probably work.
Good, thanks for reply.
Keith.