I'm shuttin up about OnecncXP!

[HuFlungDung]

before all the Mastercam guys switch over and we'll lose our competitive advantage

[wms]

Originally posted by HuFlungDung before all the Mastercam guys switch over and we'll lose our competitive advantage

I never thought about it that way.

I'm not sure I can keep my mouth shut.

Love the new "Title" and the new sig.


How about: When the going gets tough, the smart get OnecncXP.

[HuFlungDung]

One thing we'd really not want everybody to know is how much information goes along with each XFA file.

What I mean, I was just browsing through a bunch of sample files that come with the program. Usually, in my experience, sample files are included to run with a tutorial. But in OnecncXP, there is enough information that you can extract by using "edit" in the NC manager, that you can practically see everything that they do to create the toolpath.

I didn't know how to use custom toolpath before, but now I see just draw a basic 2d path above your 3d surface and it machines the Z component automatically, more like a projection of the 2d path onto the surface, except you don't have to do the task of doing the projecting.

I learned this from the sample file only, I did not read the "helptease"

[hardmill]

That could never happen.

PEACE

[CNCadmin]

Time for a MasterCam and OneCNCXP Cam OFF.

[cadcam]

Time for a MasterCam and OneCNCXP Cam OFF.

Oh not another comp? Oh well I have done it before I can do it again.

So let's get ready to RUMBLE..

All fun aside each softwares have there place..
So it all good.

But I will still for fun rumble again.

[wms]

[Mortek]

Not bad Ward, looks like a lot of fun. Here's one of my latest projects.

Ken

[cadcam]

Here is one for a customer of mine..
All from loft data.

[wms]

Here's a shot of the finished part. Now she goes to the polisher.

Designed and cut in OneCnC XP.

Got a picture of it installed on the bike if anybody wants to see.

[Mortek]

Come on Ward show us a shot of it on the bike. Pretty expensive luggage carrier don't ya think? Very impressive work.

[HuFlungDung]

Its beautiful, Ward.

So give us a ballpark estimate of the amount of time you spent creating the model and preparing the nc code? Also, give us an estimate of what you might call "your percentage proficiency" with using OnecncXP at this time. By this I mean 100% = "I just couldn't have done it any faster"