How To Open CNC Wood Router Wooden Box
The cnc wood router packing box comprises bottom, left / right frame and five wood boards (front, back,
left, right and top). First open the five wood boards, lift the bottom slightly. Pull out the
pins，then the cnc wood router machine can be lifted.
Take away the wooden pieces which fixed on the wooden bottom for fixing cnc wood router machine. Measure the four sides (front, back, left and right) of the operating platform by level instrument. Adjust height of the undercarriages till the left side and the right side of the operating platform are on a horizontal plane, the back is 5-10mm lower than the front to make for easier refluxing.
The above introduction is for opening cnc wood router case at right way.