Which controller, that's more important.
Sent from my LG-D852 using Tapatalk
Hi, anyone knows what post processor to choose from Aspire to create .nc files for 1325 Omni CNC Router??
Thank you.
Similar Threads:
Which controller, that's more important.
Sent from my LG-D852 using Tapatalk
In case anyone is wondering, I'm the twin of the other gfacer on cnczone...
Hi thanks for your reply.
I am very new to cnc so i am not sure how to get the controller specificaction.
Please find attached the description of the machine, maybe it helps:
1 OMNI 1325 Basic CNC Router with 6.0kw HSD spindle
X,Y,Z working area: 1300*2500*200mm
Drive and motor: Yako drive and stepper motor
Table size: 1500*3040mm
Spindle: 6.0kw, Italy HSD aircooling spindle, 0-18000RPM
Inverter: Fuling frequency inverter
Spindle Protection Device: Selfcooling for aircooling spindle
3.0kw Dust collector with 2 cloth bags and Dust hood
Bakelite table combined Aluminum T -slot extrusion,vacuum table
Mist Oil Sprayer for Aluminum
X, Y, Z Travelling Potioning Accuracy: ±0.05mm / 300mm
X, Y, Z Travelling Repositioning Accuracy: ±0.05mm
Frame: Big thickened Steel Square Tubes, thickness up to 8mm
X, Y structure: Helical Rack and pinion drive, Hiwin square rail linear bearing 20mm
Z axis structure: Taiwan TBI ballscrew and Hiwin square linear rail 20mm
Max Rapid Travel Rate: 32,000mm/min
Max working speed: 20,000mm/min
Working voltage: 220V, 50Hz
Command languages: G code
Control system: DSP remote controller
Software: Ucancam V10 English version
Limit stop: Extra-travel limit stop and hard limit stop
Emergency stop and Switch: Japan Omron emergency stop and SCHNEIDER switch
Package: In wooden box : 3200*2100*1900mm(12.77CBM)
Gross weight: 1950KGS
So you have a dsp controller, and you'll need a dsp post. Look for Rusty in the omni sub forum and send him a pm or email me if he doesn't respond. He's got a dsp controller and I have his email if he doesn't respond on cnc zone.
Sent from my LG-D852 using Tapatalk
In case anyone is wondering, I'm the twin of the other gfacer on cnczone...
Does anyone know what post processor I need for Omn-1325 cnc, I am using Artcam Pro
Does anyone know what to use for the Omni-1325 using artcam?
NC studio ATC
test it
Amazing! Your substance is exceptionally helpful for us to give such a decent article.
https://software.informer.com/forum/user/104523/about/
https://www.stripperweb.com/forum/me...?540273-akriti
https://cdr.cz/profil/9c6fhcsxzq
https://www.pokecardex.com/forums/me...ofile&u=429067
https://plantvillage.psu.edu/users/69191-akriti-verma
https://studiumfc.umontreal.ca/user/....php?id=346258
https://forum.instaforex.com/index.php?showuser=51287
Great! Thanks for sharing it's a valuable info