Need Help! Okuma DNC-B option


Results 1 to 3 of 3

Thread: Okuma DNC-B option

  1. #1
    Registered
    Join Date
    Jan 2010
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Cool Okuma DNC-B option

    We bought a old Okuma v4020 cadet vertical mill with a 5020 control with the DNC-B option hardware, (the DNC switch box, the Remote operations switch box, the DNC 25 pin port) but we cant find any info on how to use it.
    Can you help me???

    Similar Threads:
    Last edited by RandyRay222; 01-21-2010 at 02:23 PM.


  2. #2
    Flies Fast Superman's Avatar
    Join Date
    Dec 2008
    Location
    Antarctica
    Posts
    3110
    Downloads
    0
    Uploads
    0

    Default

    Ray
    Attachments are for our set-up on an OSP7000M using NClink

    Most transfer software are very similar to settings and usage

    Try sending files from the machine first using the DNC-B output/input page, PIP method may not work for you

    Note!!--- communication switches become effective after a machine re-boot

    Steve

    Attached Files Attached Files


  3. #3
    Registered
    Join Date
    Nov 2013
    Posts
    1
    Downloads
    29
    Uploads
    0

    Default Re: Okuma DNC-B option

    Thank you very much!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Okuma DNC-B option

Okuma DNC-B option