| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Okuma Discuss Okuma machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#13
 
11-12-2009, 02:20 PM
| |||
| |||
| I am using a RH tool M03. my turret only has one nozzle hole in it (per tool 12 tools) but the hole is on top if you are looking in at the turret so it is spraying coolant at the bottom of the toolholder. most turrets have a nozzle above and below the tool if you are using M04.  |
|
#14
11-12-2009, 02:27 PM
| |||
| |||
Must be a very early LB15. the later ones had set screw plugs you could remove on the face of the turret. We used the ball sockets (fish eyes), drilled them out and soldered a 1/4 copper tube to them. Bend them where you want them and they work. We ran off about 100 extra fish eyes one day so we had enough for the showroom for years. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Okuma LB15 tailstock alignment | emfgllc | Okuma | 7 | 05-22-2009 06:06 PM |
| okuma LB15 | NJC | Okuma | 85 | 08-08-2008 08:37 PM |
| I need IGF manual or pdf for okuma LB15 | cncldwms | Okuma | 0 | 06-23-2008 09:31 PM |
| parts catcher in my Okuma LB15 | mikul | G-Code Programing | 7 | 04-22-2008 01:49 PM |
| SmartCam .tmp for Okuma LB15 with 5020L | xs-speed | Post Processor Files | 3 | 10-20-2006 03:41 PM |
| | |
Linear Mode
