Need Help! Okuma MA-400H. Coolant off, please. - CNCzone.com-The Largest Machinist Community on the net!

Allen Thompson · #1 05-18-2009, 08:39 AM

Hi,
We have an Okuma MA-400H. How can I get the coolant to shut off when
the CNC goes into alarm? If I make an error editing, the coolant and
spindle stay on even though the g-code error does stop the axis motion
and put the machine into alarm.
Also if i forget to push the "okay to swap pallet" button, the
coolant stays on even though the machine is in an Okuma alarm.
I am in hopes that errors can be trapped and a sub routine be run on
error....

Regards,
Billy

Goldorak · #2 05-19-2009, 01:52 PM

generally on okuma's it's in the user parameter settings

something like "turn off coolant and spindle at alarm A-B-C or M00"

Algirdas · #3 05-27-2009, 04:44 PM

Make sure also, that coolant is cotrolled in auto only, not manual on.

broby · #4 05-27-2009, 09:05 PM

What controller is running your machine?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Okuma Howa Vs Okuma	gcrudgington	Okuma	5	07-01-2010 10:11 AM
Okuma RS-232	dmealer	Okuma	18	09-06-2009 04:52 AM
Anyone have a manual for a 250psi Okuma TSC pump for Okuma Mill?	Edster	Okuma	1	08-28-2008 09:09 AM
Difference between a Okuma & Okuma Howa	69owb	Okuma	7	06-04-2008 12:51 PM
Coolant or No Coolant when turning....	Crashmaster	General Metalwork Discussion	3	05-20-2007 02:20 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)