Collision Avoidance System

[Algirdas]

so what's the secret of Okuma uses cheap suppliers?
generally Okuma machines are really good. Service is good also. You should see other producers, then Okuma looks just perfect.

[mally38]

I had big crash on a multus this spring we were not trained on the cas then now we are and it is well worth it. I did about 60.000 damage at that time you can same all of the programs to a setup in cas so you do not have to redo it set on cas each time just call it up like a program i wished i was trained on it when we got the machine the crash happed when I changed a insert T1000 M603 and then i did not hit rest and started the programm boss just came over to talk to me slam. well I learned to put M602 or M603 in my TL= line too to help me not do this ever again

[Pakko]

hello!
I don´t use cas because it will take far to long time too program it. I change projects and work material from 6mm too 350mm in diameter or bigger, and everything between almost daily.