| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Okuma Discuss Okuma machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-26-2009, 04:03 PM
| |||
| |||
Our LB15/OSP5020L is giving a "907 ALARM-C lube tank flow 1" alarm. I've taken the lube line loose at the pump and cycled it and it's delivering oil from the pump. Any ideas? Thanks, Jon    |
|
#2
03-26-2009, 05:46 PM
| |||
| |||
| there is a flow switch either in or out of the tank that monitors oil moving. the outer unit is usually a brass unit that has 2 wires going to it and if you take it apart it will have a ball in it checking the flow by raising the ball. the inner style i am not sure about. |
|
#3
03-30-2009, 12:42 PM
| |||
| |||
Well after fighting with getting the lid off the pump (somebody siliconed it good), and cleaning the pickup screen, it now seems to have fixed the problem. By the way this had the internal pressure switch, which was like a mini hydraulic cylinder that actuated a micro switch. Jon |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- re Spindle Lube and Lube Pump | robkuhi | Tree | 15 | 10-24-2011 01:49 PM |
| Problem- Video on LB15 | beartrax | Okuma | 8 | 08-26-2008 11:04 PM |
| Need Help!- OKUMA LB15 "ALARM 206 A Shear Pin 4" | RISNA | Okuma | 7 | 06-15-2008 11:35 PM |
| Alarm (low lube,pressure) question | BMackinnon | Haas Mills | 11 | 07-21-2007 06:45 AM |
| Fanuc O-md Lube Time Alarm!!!! | sco999 | Fanuc | 5 | 04-28-2007 11:14 PM |
| | |
Problem resolved 
Linear Mode
