OKUMA COMMUNICATION ERROR

[alexvass]

i am trying to establish a RS232 connection between a pc and okuma LB300 with control U100L. Always i get an error 5235 device name error 2, which i can't solve it.

Any ideas?

[Superman]

Please correct me if wrong, but
does this machine come with a network card and set-up thru the "Macman" application and use an ethernet cable ?

If yes, it would be better than using a RS232 with a PC terminal, all comms can be done at the machine with no contact with the PC

does pushing the "!" button near F1 key give any other info on that alarm #5235 ?

[alexvass]

My machine hasn't a network card to connect. Sorry!
i tried to write after "PIP"-"READ"- R CN0:a.min but i get the same error.

[MAZACHS]

I don't know wish DNC program you use but, on our machines, we have:

$program name.MIN% (at the beginning)
...
...
...
M02
% (at the end)

DNC SETTING:

BAUD RATE: 4800
PARITY: EVEN
DATA BITS: 7
STOP BITS: 2

TRY THIS AND GIVE NEWS !!!

[Algirdas]

this error indicates wrong device name clearly. The best for beginning is to use default device, set by parameters, not typing device name into command. Pay attention - parameters describes separate serial communication ports for parameters, for reading and for punching part program. By the way, You can use "punch", it would be normal for this control.

[YAS]

Hi have the same problem, but I the punch work, but the read don't work ! I need help to.