osp 7000 program change

[frenzal56]

gday all ive got an okuma MX-60HB 4-axis CNC horizontal machining center, OSP 7000M control, i was wondering if anyone could give me some advice on how to change the machine program, there are three program's loaded in the machine and i wanted to choose one of the other machining programs. can some please help

[Jarwalcot]

In Auto Mode, press the F1 Key (Program Select) in the bottom left of the screen you'll see "PS" key in the program you wish to run... It should look something like this: myprogram.min.

[frenzal56]

no worries ill give that a go thanks

[frenzal56]

just quick question do i have to go into MAC MAN to change the programs?

[slavetothemetal]

No, you do not.

[frenzal56]

no worries thank everyone for their help

[put]

dude auto exedit on controlboard edit on screen then wright highlight progamme # wright edit this programe then auto on controboard programselect on screen highlight progamme# then cicle start

[scott gallagher]

When trying to retrieve a program from the TC Index I get error code 102.21.255.129 and 102.11.255.129. Have check settings on the PC. Please help what am I doing wrong

[broby]

Originally Posted by scott gallagher When trying to retrieve a program from the TC Index I get error code 102.21.255.129 and 102.11.255.129. Have check settings on the PC. Please help what am I doing wrong

You can not program select from the TC folder.
First copy the program to the machine folder, then use program select.

[littlerob]

Originally Posted by put dude auto exedit on controlboard edit on screen then wright highlight progamme # wright edit this programe then auto on controboard programselect on screen highlight progamme# then cicle start

WOW!! all I can say is "that is the mostest @ concise-erest gooder postage i # Saw cents yisterdayy"

[budgieW]

If you have DNC-DT

PSELECT TC:\O6001.MIN
PSELECT TC:\O6002.MIN
END