I think problems with optocoupler "okuma FLC1-B" (okuma FLCI-B)... who know where I can buy it? or may be equivalent part?
Hello,
Guys, can you help me, please?
We have a machine OKUMA LAW-2S 2ST OSP7000L...
Okuma write message:
1-2 CPU ALARM BUS ERROR (SYSTEM BUS PARITY) SSW=0115 ACCESS ADDRESS=001E4664
We try change board from other machine like it, and when we change SVP BOARD 1911-2160 OKUMA works ok!
We buy new board 1911-2160 (E4809-045-158-C), but OKUMA write:
1-1 CPU ALARM BUS ERROR (SYSTEM BUS) SSW=0145 ACCESS ADDRESS=FC080000
We think board new, but it is not working...
Boards very expensive, may be who know what we can do it?
May be need initialization board?
Similar Threads:
I think problems with optocoupler "okuma FLC1-B" (okuma FLCI-B)... who know where I can buy it? or may be equivalent part?
Try fiber-optic cable first. It is not uncommon for them to crack and cause faulty communication
Experience is what you get just after you needed it.