Our issue was with the Okuma MA-500HII 642.191290 – OSP-P300M control has an alarm 1703-03.

In the Diagnostic screen when we are in Handle / Manual mode with the MPG we see

• Axis Interlock 15381
• Touch Probe Sensor Advance LS not off

We have cycled the probe up and down a bunch M144 M145 and it will not go away.

We can move the machine when the door/probe is up (Advanced).


It must just be the Tool Touch Probe door -Advance limit switch stuck high/ON. I will post the switch number when we get it from Gosiger. Looks like an easy one


Similar Threads: