hello all, please, i have 2 questions :

1) how to detect if Y axis is present ? eq : warm-up program should execute Y axis code, only if Y axis is there

2) how to autoload a program ?

consider having files a.min and b.min; when execution of a.min is almost completed, b.min should automatically be selected and executed

... *.sdf / PSELECT is not allowed
... common resources are not allowed ( is not allowed to convert b.min to b.sub and call it from a.min )
... event may be executed by :
...... code located inside a.min, or
...... triggered by an external source, after a signal from a.min ( example of signal : WRITE ); eq : renishaw programs generated by *.xls file are selected automatically, but this procedure is not initiated from code, but from the *.xls macro; i am looking for know how, something like that ...

goal : less keystrokes / kindly

Similar Threads: