hy / all i can tell is that there was a recent guy with knowledge on such stuff :
http://www.cnczone.com/forums/okuma/...cnc-servo.html
Servo Products
kindly !
ps : offcourse, there maybe other users, etc, but such a topic is not common
My ever evolving lack of self control when it comes to heavy equipment, has led me to impulse buy a pretty decent Okuma LC20.
And since i have it, i need to get it working. Now after a small machine audit, and since i have an extra controller laying about i decided to retro fit it with a modern controller.
Most of the essentials are hooked up and seems to be working. However since i decided to keep the servo drives and motors,
i`m in dire need of the wiring diagrams for the servo drive units and the spindle drive unit.
The servo drives are BDU-30A.
Any of you awesome dudes have these?
Similar Threads:
Always and never are two words you should always remember never to use.
W.J
hy / all i can tell is that there was a recent guy with knowledge on such stuff :
http://www.cnczone.com/forums/okuma/...cnc-servo.html
Servo Products
kindly !
ps : offcourse, there maybe other users, etc, but such a topic is not common
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
Bdu drives are NLA, so you may want to reconsider keeping those. Last replacement cost I saw from Okuma for BLA was over 8k each. Much less expensive stuff out there if your doing a retrofit.
Sent from my SM-T813 using Tapatalk