Solved OKUMA-HOWA BACK TO WORK WITH NEW CNC AND SERVO


Results 1 to 1 of 1

Thread: OKUMA-HOWA BACK TO WORK WITH NEW CNC AND SERVO

  1. #1
    Registered
    Join Date
    May 2017
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Talking OKUMA-HOWA BACK TO WORK WITH NEW CNC AND SERVO



    I removed the old FANUC 6 controller and old DC motor, kept all valves and pumps etc. The new controller works very well, i modified the PLC of the new controller to manage the tool turret. It has been working for 3 years, no problem.

    The cost of this project is cheaper than a single FANUC service.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails OKUMA-HOWA BACK TO WORK WITH NEW CNC AND SERVO-img_1782-jpg   OKUMA-HOWA BACK TO WORK WITH NEW CNC AND SERVO-img_20140705_111603-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OKUMA-HOWA BACK TO WORK WITH NEW CNC AND SERVO

OKUMA-HOWA BACK TO WORK WITH NEW CNC AND SERVO