OKUMA LC40 SIMULTURN

[rapradeep]

Hello,

I need help!!!

Can anyone tell me how to automatically change the turret position in Okuma LC40 without changing it manually everytime.

Thanks in advance..

Similar Threads:

• Okuma LC40 has a mind of it's own on movement?
• G76 and/or G02/G03 on okuma lc40 osp5000l
• Rebuiling a Okuma LC40-1SC with livetooling
• Need Help!- Okuma LC - 20 4 Axis Simulturn
• Anyone know anything about an Okuma LC40?

[tea hole]

Yeah, gonna need more info than that to help really.
In a program you need a "T010101" for tool 1, "T020202" for 2 and so on.
Since the machine has multiple turrets, it needs to know which turret you're indexing.
so, G13 T010101 will index the upper turret to tool 1.
G14 T040404 will index the lower turret to tool 4

In order to index the machine needs to be on the "machine limits" and you can do so by programming:
G13
G0X100Z100 (INCH MODE VERSION)
G0X10000Z10000 (METRIC MODE VERSION)
T010101
G14
G0X100Z100 (INCH MODE VERSION)
G0X10000Z10000 (METRIC MODE VERSION)
T010101
M2