Need Help! Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen


Results 1 to 2 of 2

Thread: Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen

    I keep getting this fault and I have no motor overload. the fault will reset only to come back in little while. I have checked connections and I'm curious how to get to the parameter screen to adjust the setpoint for the overload , I believe it is set to low. thank you for any help out there and I look forward to helping anyone I can

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2017
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen

    hi

    it is driver problem



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen
Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen