Need Help! Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen


Results 1 to 3 of 3

Thread: Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen

    I keep getting this fault and I have no motor overload. the fault will reset only to come back in little while. I have checked connections and I'm curious how to get to the parameter screen to adjust the setpoint for the overload , I believe it is set to low. thank you for any help out there and I look forward to helping anyone I can

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2017
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen

    hi

    it is driver problem



  3. #3
    Registered OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    901
    Downloads
    0
    Uploads
    0

    Default Re: Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen

    Are you sure is isn't something stupid like leaving the brake on while positioning? Or output for brake is backwards so that brake on while positioning and off while stationary? How do you determine that setting is too low? Are you watching the load for the a axis and if so what values do you have when rotating?

    Usually the overload is because current draw is high and will reset after motor cools back down. Is there any mechanical binding?

    Best regards,

    Experience is what you get just after you needed it.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen
Okuma M 560 - 1192-07 Alarm- A MCS Motor overload A-Axis 5BB05CE - code on screen