Need Help! OKUMA FUB-P4M4


Results 1 to 3 of 3

Thread: OKUMA FUB-P4M4

  1. #1
    Member antoniomasat's Avatar
    Join Date
    Feb 2016
    Location
    Torreon
    Posts
    17
    Downloads
    0
    Uploads
    0

    Unhappy OKUMA FUB-P4M4

    Hello!

    I have a FUB-P4M4 board damaged, but I have only these numbers 1911-2241, I don't have the version. I got another board with these numbers 1911-2241 - 111-693 Version 2.0, someone knows if I can use this board without any problem?

    Thanks in advance for your help!

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2012
    Location
    USA
    Posts
    164
    Downloads
    0
    Uploads
    0

    Default Re: OKUMA FUB-P4M4

    They should be interchangeable - we probably have a couple dozen in stock, different versions, but I have never had one that isn't interchangeable with another (they are all tested in our simulator prior to going into stock). If you need one, just email me at kevin1@cnctechnical.com. Ours come with a full 1 yr. warranty.



  3. #3
    Member antoniomasat's Avatar
    Join Date
    Feb 2016
    Location
    Torreon
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: OKUMA FUB-P4M4

    Thanks a lot for your help!

    I'll send you an email for request quote



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OKUMA FUB-P4M4

OKUMA FUB-P4M4