How do I cancel T-command?

[myhäje]

VERY basic question, to which I never got the answer, so... How do I cancel T? The only way so far is to call M6 which puts an unnecessary tool to spindle. Is there any faster way? I use tool pre-staging a lot and this has become a nuisance.

Similar Threads:

• Move command works until velocity command issued
• Problem- need to cancel m6
• G66 Cancel??
• How do I cancel a G92 on the fly?
• How i cancel G92 command?

[wenteq machine]

We call up T0


Sent from my iPad using Tapatalk

[deadlykitten]

How do I cancel T?

i never cancel corections

The only way so far is to call M6 which puts an unnecessary tool to spindle

this is not good programing

Is there any faster way?

speed of light

I use tool pre-staging a lot and this has become a nuisance.

prestaging :
... does not require T cancel
... should not load a wrong tool in your spindle

---

why do you wanna cancel ? try to "preset" + "no T cancel" ; "canceling "is not a must

[grdnanthy]

M64 should un-prep a tool


Sent from my iPad using Tapatalk

[deadlykitten]

it may be possible to cancel, but i need to understand your situation

... magazine : M63 , M64
... programing : VWKA* , VWKB* ( readonly )

* - axis
A - without corection
B - with corection

ps : from teahole

[Superman]

If you have pre-selected a tool.... then M64 will unload & place the pot back into the magazine for indexing

M63 will select the closest empty pot in the magazine & prepare it into the toolchange area
M6 with no T specified will empty the spindle

usage

....
M5
M9
G30 P1
M63
M6
M30
%