Need Help! Okuma 290 Doesn´t recognice arcs while is running - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 16 of 16

Thread: Okuma 290 Doesn´t recognice arcs while is running

  1. #13
    Registered OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    904
    Downloads
    0
    Uploads
    0

    Default Re: Okuma 290 Doesn´t recognice arcs while is running

    Quote Originally Posted by elcapilla View Post
    There is the picture of the screen
    Attachment 351292
    Is this after the parameter adjustment or before? What is your parameter set at? Did you try larger values?

    Best regards,

    Experience is what you get just after you needed it.


  2. #14
    scaring mice @ north pole deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    1431
    Downloads
    0
    Uploads
    0

    Default Re: Okuma 290 Doesn´t recognice arcs while is running

    maybe he can't find the "long word" ... maybe a better description would help him i don't know ...

    There's no secret. You just press the accelerator to the floor and steer left
    Röyksopp - Bounty Hunters (Star Wars Headspace),
    https://www.youtube.com/watch?v=lPZJkKscK9M


  3. #15
    Registered
    Join Date
    Nov 2013
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Okuma 290 Doesn´t recognice arcs while is running

    before, the program that you sent me works very well, i replace I and J for R, and some programs works and some not



  4. #16
    scaring mice @ north pole deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    1431
    Downloads
    0
    Uploads
    0

    Default Re: Okuma 290 Doesn´t recognice arcs while is running

    can you set the cnc parameters described by OkumaWiz, at post 9 ?

    ... also, pls share a program that does not work, generated with R

    Last edited by deadlykitten; 02-22-2017 at 01:33 PM.
    There's no secret. You just press the accelerator to the floor and steer left
    Röyksopp - Bounty Hunters (Star Wars Headspace),
    https://www.youtube.com/watch?v=lPZJkKscK9M


Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands